Akai MPC-3000 v3.0 Owners Manual.pdf - Fdiskc

Chapter 11: MIDI FunctionModel: MPC3000 (sequencer section) MIDI Implementation Chart Version: 3.0Function Transmitted Recognized RemarksBasic Default 1-16 1-16Channel Channel 1-16 1-16Default 3 1Mode Messages ✕ ✕Altered ✕ ✕Note 0-127 0-127Number True Voice 0-127 0-127Velocity Note ON ❍ ❍Note OFF ❍ ❍After Key’s ❍ ❍Touch Ch’s ❍ ❍Pitch Bender ❍ ❍Control 0-127 ❍ ❍ See note belowChangeProg ❍ ❍Change True# 0-127 0-127System Exclusive ❍ ❍System :Song Pos ❍ ❍:Song Sel ✕ ❍Common :Tune ✕ ✕System :Clock ❍ ❍Real Time :Commands ❍ ❍Aux :Local ON/OFF ✕ ✕Mes- :All Notes Off ❍ ✕sages :Active Sense ✕ ✕:Reset ✕ ✕Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO ❍ : YesMode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO ✕ : NoNote: If the Convert Sustain Pedal To Duration field (accessed by pressing the MIDI keyand selecting option 2) is set to ON, then incoming controller 64 messages (sustain pedal)will not be recorded into sequences. Instead, any notes that are currently pressed when aSustain On message is received are internally held on, even after they are released, until aSustain Off message is received. The result is that the individual durations of notes arelengthened. This is explained further in the “MIDI Receive Channel, Local Mode, Soft Thru,Note Variation Controller Assign and Sustain Pedal Processing” section of the manual,earlier in this chapter.Page 218