13.07.2015 Views

Technical Appendix Specifications for the RADIO SYSTEM UPGRADE

Technical Appendix Specifications for the RADIO SYSTEM UPGRADE

Technical Appendix Specifications for the RADIO SYSTEM UPGRADE

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

6. Multiple sub-rate per DS0 (RS-422/423 interface @ 1.2, 2.4, 4.8, 9.6, 14.4, 19.2 kb)7. 4-wire voice, E&M signaling8. FXO (office) end9. FXS (subscriber) end10. 2- and 4-wire voice, E&M signaling11. Private line ringdownF. Carrier and Equipment Per<strong>for</strong>mance Monitoring - Error Detection and Reporting. The digitalchannel bank shall continuously monitor <strong>the</strong> status of all elements or components of <strong>the</strong>equipment, including loopback testing. The digital channel bank equipment shall generate analarm in case of a malfunction, and respond to yellow, blue and out-of-frame alarms receivedon <strong>the</strong> DS1 span.The per<strong>for</strong>mance monitoring parameters and thresholds should be provisioned from a localinterface or from a remote workstation.G. Test Access. Test Access, Loopback function (hard, soft, or both) shall be provided. Metallictest access shall be provided via faceplate mounted bantam jacks. A software configurableoption shall be available with <strong>the</strong> Intelligent Access Multiplexer. The digital channel bankshall have <strong>the</strong> following maintenance features:1. Front-panel mounted ACO cutoff switch, front-panel mounted bantam jacks <strong>for</strong> testingand alignment;2. Digital 1-kHz and quiet code sources <strong>for</strong> channel unit testing or alignment;3. Dry, Form-C, relay contracts (rated at 48V dc, 1 amp) <strong>for</strong> office alarm; local channelloopback;4. LED status indicators, such as ACO, power on, power failure, PCM fail, frame loss, andtrunk processing. It also processes and displays local alarms and remote alarms.H. Loopback. The digital channel bank shall provide <strong>the</strong> following loopback capabilities:1. Local Transmit Test Loopback2. Local Transmit AIS Loopback3. Network Loopback4. Channel Unit and CSU LoopbacksI. Local Alarm Notification. The digital channel bank shall provide a channel bank control,alarm, and monitor module that can display alarm status and provide <strong>the</strong> function of control<strong>for</strong> <strong>the</strong> equipment configuration. The feature should be built into <strong>the</strong> line interface unit(LIU). The LIU shall have front-panel LEDs that indicate local and remote alarms. It alsoshall have dry relay contacts <strong>for</strong> external audible and visual alarms. The digital channel bankequipment shall have <strong>the</strong> following trunk port (common equipment) visual indicators:1. Line Interface Unit (LIU)City of San Luis Obispo 46 Radio System Upgrade TECHNICAL APPENDIX

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!