UL Addendum - Tyco Security Products

More documents

Recommendations

Info

Single Device Alarm Zone – Ranges of resistanceStatus Input Resistance CommentShort 0 - 100 Ω ShortLine Fault 101 Ω – 360 Ω Wrong resistorNO Alarm 361 Ω – 750 Ω 500 ΩSecure 751 Ω - 1450 Ω 1K ΩNC Alarm 1451 Ω - 2980 Ω 2K ΩLine Fault 2981 Ω – 11.8K Ω Wrong resistorOpen Loop > 11.8K Ω Cut wire30 C·CURE 800/8000 V9.4 UL Addendum
Single Resistor End Line ModeWiring for Multiple Device NC Alarm ZonesTo wire a NC alarm loop with multiple alarm devices to an input circuit, wire the switches inseries and connect a single 1 K Ω EOL resistor in series with the “end of line” alarm device asshown below. This circuit will provide 4-state supervision, Secure, Alert, Shorted, and LineFault. This mode will prevent supervision errors from being reported to the Monitoring Stationwhen Open Loop is detected. In a single end of line resistor input configuration with multipledevices, an Open Loop is seen as an alarm.Multiple Device Alarm Zone:Normally Closed Switches1 KohmInput CircuitAlarm DeviceAlarm DeviceReference Table below for Line Status conditionsThe number of normally closed detection devices that each NC alarm input can supervise islimited only by the resistance of the loop. The total EOL resistance for wire length, contacts, andthe supervision EOL resistor must not exceed 1300 Ω.Single Resistor End Line Mode – Ranges of resistanceStatus Input Resistance CommentShort 0 – 100 ShortLine Fault 101 – 360 Wrong resistorNO Alarm 361 – 750 500 Ω (N/A)Secure 751 – 1450 1K ΩNC Alarm 1451 – 2980 2K Ω (N/A)Line Fault 2981 – 11.8K Wrong resistorAlarm >11.8K Treated like 2K ΩC·CURE 800/8000 V9.4 UL Addendum31
Page 1 and 2: C•CURE 800/8000 System and Compon
Page 3 and 4: OVERVIEWThis addendum provides UL r
Page 5 and 6: SOFTWARE CONFIGURATION REQUIREMENTS
Page 7 and 8: MINIMUM PC CONFIGURATION FOR C•CU
Page 9 and 10: Table 4. Server Requirements - Five
Page 11 and 12: INSTALLATION LOCATIONSThe following
Page 13 and 14: ModelOperatingTemperature(Environme
Page 15 and 16: OPERATIONAL RESTRICTIONSThe followi
Page 17 and 18: FeatureCarpool Anti-passbackArea Mu
Page 19 and 20: RepliStor replicates data from one
Page 21 and 22: Product Code Description Field Repl
Page 23 and 24: Product Code Description Field Repl
Page 25 and 26: Outputs Open collector, +12V DC, 0.
Page 27 and 28: Wiring Readers To an iSTARC·CURE 8
Page 29 and 30: The following diagram show typical
Page 31: Single Device Alarm Zone:Normally O
Page 35 and 36: iSTAR Backup DatabaseThe software s
Page 37 and 38: Dual End-Of-Line (NC) Configuration
Page 39 and 40: UL LISTED ENCRYPTED LINE SECURITY C
Page 41 and 42: Network ConfigurationThe "UL Listed
Page 43 and 44: PNET1 InstallationPNET1 PhotographC
Page 45: APC Safety• Catastrophic Event Pr

UL Addendum - Tyco Security Products

Create successful ePaper yourself

Delete template?

Save as template?