13.07.2015 Views

Technische fiche - Delta-Temp

Technische fiche - Delta-Temp

Technische fiche - Delta-Temp

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

BT08L005GB-01120PACKAGED362 - 904PM - PHASE MONITORThe phase monitor makes it possible to check the correct connection of the phases and their imbalance in unitspowered with a tri-phase system. If the connection of the phases is not correct, or the threshold of phaseimbalance is exceeded, or the voltage is too high or too low for a certain amount of time, the monitor acts on thecontrol circuit and orders the machine to be shut down. As soon as nominal line conditions are restored, the unit isautomatically reset.The device is installed and wired on board the machine.PFCP - POWER FACTOR CORRECTION CAPACITORS (COSFI > 0.9)The component is necessary to lower the phase difference betweencurrent and voltage in the electromagnetic components of the machine,such as asynchronous motors.By re-phasing it is possible to reduce the intensity of the line current byreducing a part of the power of the mains (reactive power). This leads toan economic benefit which the energy provider grants to the final user.The component makes it possible to bring the cosfi power factor tovalues which on average are greater than 0.9.MOB - SERIAL PORT RS485 WITH MODBUS PROTOCOLIt allows serial connection of supervision systems, using ModBus as thecommunication protocol. It allows access to the complete list ofoperating variables, controls and alarms.The device is installed and wired on board the machine.LON - SERIAL PORT RS485 WITH LONWORK PROTOCOLIt allows serial connection of supervision systems, using LonWork as thecommunication protocol. It allows access to a list of operating variables,control and alarms compliant with the Echelon standard.The device is installed and wired on board the machine.RCMRX - REMOTE CONTROL WITH REMOTE MICROPROCESSOR CONTROLDevice which allows complete control of the machinefrom a remote location. It is easily wall-mounted, andhas the same appearance and functions as the userinterface on board the unit (user-friendly software).To be connected during commissioning of the machineat a maximum distance of 100 m.Roof-top connectionCablepower supply150separately supplied accessories44

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!