1066 Liquid Analytical Transmitter - Emerson Process Management
1066 Liquid Analytical Transmitter - Emerson Process Management
1066 Liquid Analytical Transmitter - Emerson Process Management
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>1066</strong> Instruction Manual Section 10: HART CommunicationLIQ_MAN_<strong>1066</strong> September 2013<strong>1066</strong>DO, <strong>1066</strong>CL, <strong>1066</strong>OZ Statuss BitsByte / Bit Meaning / Class Device Status Bits Set2 / 42 / 54 / 34 / 45 / 25 / 35 / 6SENSOR_CURRENT > 300 nA for OXYGEN BioRx - OtherSENSOR_CURRENT > 800 nA for OXYGEN BrewingSENSOR_CURRENT > 106 uA for OXYGEN Oxygen in GasSENSOR_CURRENT > 350 nA for OzoneSENSOR_CURRENT > 5 uA for Free ChlorineSENSOR_CURRENT > 40 uA for Total ChlorineSENSOR_CURRENT > 20 uA for Monochloramine1. Make sure the device configuration matches the sensor being used.2. Check sensor wiring.3. Replace sensor.Need Zero Calibration / WarningThe sensor offset is too high resulting in a negative reading.The sensor zero limits are:PV < -0.5 if unit is ppm or mg/LPV < -50 if unit is ppb or ug/LPV < -2.0 % for % SaturationPV < -2.0 % for Concentration in GasPV < -20 ppm for Concentration in GasPV < -30 mmHg for Partial PressurePerform sensor a zero calibration.Calibration Error / WarningThere has been a calibration error.Check the sensor.Sensor Zero Error / WarningAn error occurred in the last sensor zero procedure.Check sensor and repeat sensor zero procedure.Sensor Zero In Progress / OtherA sensor zero is being or has been performed.Air Cal In Progress / OtherAn air calibration is being or has been performed.Stabilization In Progress / OtherThe sensor is stabilizing or has stabilized.4 – More Status Available4 – More Status Available4 – More Status Available4 – More Status Available4 – More Status Available4 – More Status AvailableHART Communications 111
Change language