13.3” LOW VOLTAGE BedMate II DTV Operations Manual - Hci

More documents

Recommendations

Info

----------------------------------------------------------------------------------BedMate II OPERATIONS MANUAL KEY DEFINE The functions of some front panel buttons can be redefined. To change the functions: 1. Enter the setup menu. See page 14. 2. Select “Keypad definition” in the “Others” menu and press the right arrow button. 3. Use the up/down arrow buttons to select the button you wish to change. Not all buttons can be changed. There are 9 buttons that can be changed. Continue pressing the down arrow button to see additional selections. See diagram for button locations. 4. Use the right and left arrow button to change the function. 5. Repeat steps 2 and 3 for all buttons you wish to change. 6. Press the "BACK" button when finished. HealthCare Information, LLC 34
----------------------------------------------------------------------------------BedMate II OPERATIONS MANUAL VIRTUAL CHANNELS Using the virtual channel mapping feature of your HCI television, will allow you to make a custom channel lineup. You can assign both analog and digital channels a virtual channel number, different from the one given from your cable company. Virtual channels allow each channel to be assigned a whole digit number even if it is a digital channel. When Virtual Channels are turned on the TV channel line up will be based on the assigned Virtual Channels. The TV will tune channels using the virtual number. The virtual number will be displayed as the channel number but the TV will actually tune to the channel the virtual number was assigned to. See pages 18 and 19 for instructions on setting the virtual channel number. Another use for virtual channels is when you have digital channels but no period button on the pillow speaker. If you have a digital channel such as 12.1 you can assign a virtual channel number such as 6. (Any unused number can be used.) Now to tune to channel 12.1 you enter 6 on the pillow speaker. The TV channel number display reads 6 but the set tunes to channel 12.1. The example shown below shows how channels are tuned based on the 6 channels shown and if Virtual Channel is on or off. NOTES: To aid setting up virtual channels you can turn Real Channel Display on in the Advance Setting menu. This will show both the Virtual Channel and real channel number on the OSD channel display. See page 19. If Virtual CH No. is set to On only channels that have a virtual channel number assigned will be available regardless of the bank setting. HealthCare Information, LLC 35
Page 1: 13.3” LOW VOLTAGE BedMate II DTV
Page 4 and 5: -----------------------------------
Page 6 and 7: -----------------------------------
Page 8 and 9: -----------------------------------
Page 10 and 11: -----------------------------------
Page 12 and 13: -----------------------------------
Page 14 and 15: -----------------------------------
Page 16 and 17: -----------------------------------
Page 18 and 19: -----------------------------------
Page 20 and 21: -----------------------------------
Page 22 and 23: -----------------------------------
Page 24 and 25: -----------------------------------
Page 26 and 27: -----------------------------------
Page 28 and 29: -----------------------------------
Page 30 and 31: -----------------------------------
Page 32 and 33: -----------------------------------
Page 36 and 37: -----------------------------------
Page 38 and 39: -----------------------------------
Page 40 and 41: -----------------------------------

13.3” LOW VOLTAGE BedMate II DTV Operations Manual - Hci

Create successful ePaper yourself

Delete template?

Save as template?