13.3” LOW VOLTAGE BedMate II DTV Operations Manual - Hci

----------------------------------------------------------------------------------BedMate II OPERATIONS MANUAL
BANKS
Banks, also known as tiers, allows the set to have up to 4 different channel lineups that can be easily switched to without
reprogramming the set. The banks are useful in rental applications where one bank can be only free channels and the three
remaining banks can include various premium channels. Another use would be for TV in different areas. All TV could be
programmed the same with Bank 1 setup for patient rooms, Bank 2 setup for staff locations, bank 3 for waiting areas and bank 4
for pediatrics. Banks can be selected using the IR controller. See page 18.
Sample Bank setup.
In the above example if the TV was set for:
Bank 1 the channel lineup would be 8 and 9.1.
Bank 2 the channel lineup would be 10, 11, 12 and 12.1
Bank 3 the channel line up would be 8, 12 and 12.1
Bank 4 the channel lineup would be 8, 9.1, and 10.
While in this screen the colored buttons on the HCI IR remote have the following functions. Current bank is determined by the
location of the cursor. (high lighted box)
Red Turns on (box checked) all of the channels in the current bank.
Green Turn off (box unchecked) all of the channels in the current bank.
Yellow Copies the current bank.
Blue Pastes the copied (yellow button) bank into the current bank.
NOTE: The current bank can be selected with the “B” button on the IR remote control. If Bank Switch Password is set to on
you must first enter Function Code 9999 to change the current bank setting.
SOURCE BANK
Source Bank lets you select which input sources are available based on the current Bank setting. Source Bank setup works the
same as Bank setup. Available sources for the 13.3 inch set are TV, SD/USB, FM and VGA. If a source is not in the lineup for
the current Bank (box unchecked) that input source will not be available when the Input or Source buttons are pressed.
See page 19.
HealthCare Information, LLC 36