Pneumatic Modular Gripping System

GSW-B with 2-Finger Parallel Gripper
Special Gripper • Gripper with shaft interface
GSW-B with PGN-plus 50
GSW-B with PGN-plus 64
1 Gripper connection
2 Finger connection
HT Depth of the centering sleeve hole in the
matching part
IT Weldon clamping surface
i Please refer to the gripper in question for more detailed information. Suitable gripper
accessories can be found in the additional views at the end of the gripper size in
question.
1 Gripper connection
2 Finger connection
HT Depth of the centering sleeve hole in the
matching part
IT Weldon clamping surface
i Please refer to the gripper in question for more detailed information. Suitable gripper
accessories can be found in the additional views at the end of the gripper size in
question.
GSW-B with PGN-plus 80
GSW-B with PGN-plus 100
1 Gripper connection
2 Finger connection
HT Depth of the centering sleeve hole in the
matching part
IT Weldon clamping surface
i Please refer to the gripper in question for more detailed information. Suitable gripper
accessories can be found in the additional views at the end of the gripper size in
question.
1 Gripper connection
2 Finger connection
HT Depth of the centering sleeve hole in the
matching part
IT Weldon clamping surface
i Please refer to the gripper in question for more detailed information. Suitable gripper
accessories can be found in the additional views at the end of the gripper size in
question.
www.schunk.com
1315