Pneumatic Modular Gripping System
Pneumatic Modular Gripping System - Spinet
Pneumatic Modular Gripping System - Spinet
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
GSW-B with 2-Finger Parallel Gripper<br />
Special Gripper • Gripper with shaft interface<br />
Mounting kit for RSS<br />
Reed Switches – RSS – Mounting kits<br />
RSS mounted with mounting kit<br />
Description ID l1 l2 d1<br />
Mounting kit for RSS<br />
AS-RSS-GSW-H 0308440<br />
GSW-B 64-PZ 79 mm 38 mm Ø 177 mm<br />
GSW-B 80-PZ 87 mm 46 mm Ø 191 mm<br />
GSW-B 100-PZ 97 mm 56 mm Ø 210 mm<br />
The transmitter RSS-T2 can be assembled with the mentioned attachment kit.<br />
End position monitoring mounted with mounting kit<br />
Description<br />
ID<br />
Mounting kit for RSS<br />
AS-RSS-GSW-H 0308440<br />
Radio system RSS<br />
RSS-T2 0377710<br />
RSS-R1 0377700<br />
RSS-R-A 0377730<br />
Mounting kit for Reed Switches<br />
AS-RMS 80 PGN/PZN-plus 64/80 0377725<br />
AS-RMS 80<br />
PGN/PZN-plus 100/125<br />
0377726<br />
Reed Switches<br />
RMS 22-S-M8 0377720<br />
RMS 80-S-M8 0377721<br />
The radio system consists of a transmitter RSS-T2, the receiver RSS-R1 and the antenna<br />
RSS-R-A.<br />
For cylindrical reed switches RMS 80 the mentioned attachment kits are required, and can<br />
be directly assembled into the sensor’s C-slot of the grippers. In case of gripper size 50<br />
standard monitoring is not possible. For size 64 just via reed switch RMS 80 is necessary.<br />
i Two sensors (Closer/S) are required for each gripper, plus extension cables as an<br />
option.<br />
i The mounting kit needs to be ordered optionally as an accessory.<br />
i Please note the minimum permitted bending radii for the sensor cables, which are<br />
generally 35 mm.<br />
1316 www.schunk.com
Change language