INDUSTRIAL GRADE CPU BOARD User’ s Guide
AR-B1479 INDUSTRIAL GRADE CPU BOARD User' s ... - Acrosser
AR-B1479 INDUSTRIAL GRADE CPU BOARD User' s ... - Acrosser
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
AR-B1479 <strong>User’</strong>s <strong>Guide</strong><br />
2.4 2D GRAPHICS ENGINE<br />
! 64-bit windows accelerator.<br />
! Backward compatibility to SVGA standards.<br />
! Hardware acceleration for text, bitblts, transparent blts and fills<br />
! Up to 64 x 64 graphics hardware cursor.<br />
! Up to 4MB long linear frame buffer.<br />
! 8-, 16-, 24-and 32-bit pixels.<br />
! Drivers available for various OSes.<br />
2.5 INTERRUPT CONTROLLER<br />
Most of the IPC signals are multiplexed: Interrupt inputs, DMA Request inputs, DMA Acknowledge outputs. The<br />
figure below describes a complete implementation of the IRQ [15:0] time multiplexing. When an interrupts line is<br />
used internally, the corresponding input can be grounded. In most of the embedded designs, only few interrupts<br />
lines are necessary and the glue logic can be simplified.<br />
Typical IRQ multiplexing<br />
When the interface is integrated into the STPC, the corresponding interrupt line can be grounded as it is connected<br />
internally.<br />
For example, if the integrated IDE controller is activated, the IRQ [14] and IRQ [15] inputs can be grounded.<br />
10