INDUSTRIAL GRADE CPU BOARD User’ s Guide

More documents

Recommendations

Info

AR-B1479 User’s Guide 5. BIOS CONSOLE This chapter describes the AR-B1479 BIOS menu displays and explains how to perform common tasks needed to get up and running, and presents detailed explanations of the elements found in each of the BIOS menus. The following topics are covered: ! BIOS Setup Overview ! Standard CMOS Setup ! Advanced CMOS Setup ! Advanced Chipset Setup ! Power Management ! PCI/Plug and Play ! Peripheral Setup ! Auto-Detect Hard Disks ! Password Setting ! Load Default Setting ! BIOS Exit 5.1BIOS SETUP OVERVIEW The BIOS is a program used to initialize and set up the I/O system of the computer, which includes the ISA bus and connected devices such as the video display, diskette drive, and the keyboard. The BIOS provides a menu-based interface to the console subsystem. The console subsystem contains special software, called firmware that interacts directly with the hardware components and facilitates interaction between the system hardware and the operating system. The BIOS default values ensure that the system will function at its normal capability. In the worst situation the user may have corrupted the original settings set by the manufacturer. After the computer is turned on, the BIOS will perform diagnostics on the system and display the size of the memory that is being tested. Press the [Del] key to enter the BIOS Setup program, and then the main menu will show on the screen. The BIOS Setup main menu includes some options. Use the [Up/Down] arrow key to highlight the option that you wish to modify, and then press the [Enter] key to select the option and configure the functions. AMIBIOS HIFLEX SETUP UTILITY - VERSION 1.20 (C) 1998 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup PCI/Plug and Play Setup Peripheral Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. Figure 5-1 BIOS: Setup Main Menu 27
AR-B1479 User’s Guide CAUTION: 1. AR-B1479 BIOS the factory-default setting is used to the Acrosser recommends using the BIOS default setting, unless you are very familiar with the setting function, or you can contact the technical support engineer. 2. If the BIOS settings are lost, the CMOS will detect the to boot the operation system, this option will reduce the performance of the system. Acrosser recommends choosing the in the main menu. This option gives best-case values that should optimize system performance. 3. The BIOS settings are described in detail in this section. 28
Page 1 and 2: AR-B1479 INDUSTRIAL GRADE CPU BOARD
Page 3 and 4: AR-B1479 User’s Guide 5.10.1 Auto
Page 5 and 6: AR-B1479 User’s Guide 0.6 ORGANIZ
Page 7 and 8: AR-B1479 User’s Guide 1.3 FEATURE
Page 9 and 10: AR-B1479 User’s Guide 2.2 64-BIT
Page 11 and 12: AR-B1479 User’s Guide 2.4 2D GRAP
Page 13 and 14: AR-B1479 User’s Guide 2.7 TIMER /
Page 15 and 16: AR-B1479 User’s Guide 3. SETTING
Page 17 and 18: AR-B1479 User’s Guide (2) 44-Pin
Page 19 and 20: AR-B1479 User’s Guide 3.2.7 Power
Page 21 and 22: AR-B1479 User’s Guide 3.2.12 PC/1
Page 23 and 24: AR-B1479 User’s Guide 3.2.15 COM1
Page 25 and 26: AR-B1479 User’s Guide 3.2.18 ATX
Page 27: AR-B1479 User’s Guide 4. INSTALLA
Page 31 and 32: AR-B1479 User’s Guide 5.3 ADVANCE
Page 33 and 34: AR-B1479 User’s Guide Internal Ca
Page 35 and 36: AR-B1479 User’s Guide RAS Prechar
Page 37 and 38: AR-B1479 User’s Guide Clear NVRAM
Page 39 and 40: AR-B1479 User’s Guide 5.11.1 Save

INDUSTRIAL GRADE CPU BOARD User’ s Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?