You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TOP & BOTTOM RAILS<br />
The size of horizontal top and bottom rails will vary depending on the height of the panel, the<br />
number of louvres and the location of any divider rails in accordance with factory specifications.<br />
Factory specifications allow for the same size top and bottom rail on a panel, anywhere between<br />
90mm and 162mm. The top rail size may differ from the bottom rail size on panels ordered with a<br />
critical divider rail. This is unavoidable.<br />
OPUS rails come in four sizes and are cut in height to accommodate critical divider rails. ENCORE<br />
Inside has three rail sizes that cannot be cut to accommodate critical divider, so the divider rail<br />
may vary by up to 40mm. ENCORE Outside rails consist of two sections that can be adjusted to<br />
accommodate divider rails. The horizontal join is visible and a feature of the shutter.<br />
Orders will not be accepted with requests for rail sizes smaller than 80mm, regardless of warranty<br />
waiver. This is due to smaller rails not allowing for metal inserts which compromises the strength of<br />
the panel.<br />
OPUS<br />
Euro Close<br />
(Two way close)<br />
80mm – 140mm<br />
ENCORE Inside<br />
Standard Close<br />
(One way close)<br />
90mm<br />
106mm<br />
122mm<br />
ENCORE Outside<br />
Euro Close<br />
(Two way close)<br />
50mm – 162mm<br />
12