Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Offset Tilt Rod<br />
Half circle shaped rod of material used as tilt rod, installed at front of panel, off to far left or far<br />
right side (hinge side).<br />
Pivot hinge<br />
Hinge used for direct mount layouts with multiple panels, installed at top and bottom of panels<br />
to avoid use of T posts. Not recommended on tall panels.<br />
Rabbet Stile<br />
Rebate edge in square stile that overlaps where two panels meet to block light gaps.<br />
Rails<br />
Horizontal lengths at top and bottom of panels that give strength and shape to shutters.<br />
Square Stile<br />
Four straight edges, these stiles are used for single panels.<br />
Stile<br />
Vertical sections on left and right side of shutter panel that give shape and strength to shutters.<br />
Tension Screw<br />
Screw used one per louvre bank to adjust stiffness of louvres.<br />
T-Post<br />
Section of frame used to break wide windows that require more than two panels. Can be used<br />
vertically or horizontally.<br />
Tilt Rod<br />
A wood or metal rod that connects louvres together in banks to allow sections to be opened or<br />
closed together. Connected at front or rear.<br />
64
Change language