Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HARDWARE & OPTIONS<br />
Track Bypass<br />
Box out board<br />
OPUS boards are made of<br />
two pieces of polymer<br />
extrusion with a join,<br />
ENCORE is 3mm thick,<br />
ribbed aluminium. Boards<br />
are optional for all sides.<br />
OPUS POLYMER ENCORE INSIDE ENCORE OUTSIDE<br />
Bypass Close<br />
19mm<br />
Bypass Close 28mm<br />
Bypass Close 28mm<br />
140mm<br />
150mm<br />
150mm<br />
Bypass Open Bypass Open<br />
115mm<br />
Bypass Open<br />
190mm 190mm 190mm<br />
Fascia & Returns<br />
Supplied as standard for all<br />
bypass plus returns for<br />
outside mount, OPUS fascia<br />
is polymer extrusion, whilst<br />
ENCORE is 3mm thick<br />
aluminium extrusion.<br />
Inside Mount<br />
140mm<br />
Outside Mount<br />
140mm<br />
19mm<br />
19mm<br />
Inside Mount<br />
50mm<br />
Outside Mount<br />
150mm<br />
Inside Mount<br />
50mm<br />
Outside Mount<br />
150mm<br />
Headboard Support<br />
Headboard bracket or<br />
angle is supplied as<br />
standard and attached<br />
above header board as<br />
extra support on outside<br />
mount installations.<br />
180mm<br />
40mm x 40mm<br />
40mm x 40mm<br />
Top Track<br />
Clear anodised tracks are<br />
supplied attached to<br />
headboard for OPUS and<br />
ENCORE Inside, and loose<br />
for ENCORE Outside.<br />
27mm<br />
27mm<br />
27mm<br />
27mm<br />
39mm<br />
31mm<br />
Bottom Track<br />
Clear anodised tracks are<br />
supplied loose and taped<br />
to floor or bottom board<br />
with supplied high tack<br />
double sided tape.<br />
Recessed U track supplied<br />
by default for OPUS unless<br />
specified other.<br />
Wheel Carrier<br />
14.6mm<br />
mm<br />
24mm<br />
23.3mm<br />
m<br />
8.6mm<br />
7mm<br />
19mm<br />
11mm<br />
30mm<br />
12mm<br />
High quality wheel carriers<br />
run in the top track and<br />
connect each panel at the<br />
top plate.<br />
31
Change language