TeamCAD BIM eBook v2 ENG

electrical, or plumbing
installations and speed up the
process of data generation for
these disciplines. Also, remember
that importing data instead of
manually entering data minimizes
the possibility of human error.
I hope that by reading the
introductory part of the data
exchange between BIM models of
different disciplines, you have
come to realize that such an
exchange is indeed possible by
clicking on the “Run” button of a
specific Dynamo script. So let's
start with the examples.
Example 7
Take, for instance, the necessary
exchange of data related to a
room in the BIM architecture
model - "Room" and a room in
the BIM mechanical installations
model - "Space".
Using the Dynamo script, it is
possible to transfer data from the
Room to the Space in a
straightforward way.
Please watch the video:
Example 8
It is also possible to use data
from the architectural category
"Room" related to the room
purpose and then generate
surface loads using them. Please
see an example:
With this example, I would finish
the article on the BIM workflow
automation and give some
conclusions.
I hope that by reading the article
"Small But Big Savings in The BIM
Workflow" and looking at the
examples, you have seen the
potential of the BIM workflow
automation tool, and how much
time can be saved by automating
BIM modeling, generating data
for a BIM model of your own
discipline, and what is the
potential of automated and
arranged data exchange between
different disciplines in the BIM
workflow.
Always keep in mind that by
using the BIM workflow
automation tool, you minimize
the potential for human error
when generating or entering
incorrect data.
The purpose of automation by
using its tools is to relieve the
people from the tedious, manual
tasks of the BIM workflow, and to
enable spending the time spent
in manual work on tasks that
require creative, intelligent,
human-only solutions that
automation tools could not reach.
If you look at the possibilities of
BIM workflow automation and
that once written script can be
applied to an unlimited number
of projects, it practically means
that any script or other BIM
workflow automation tool will pay
you off through subsequent
projects.
Always keep in mind that the
limits of your imagination are the
only limiting factor in the ideas of
how to optimize and automate
BIM modeling since, in the tools
related to the automation and
optimization of the BIM workflow,
there are practically no
limitations.
If you have any questions,
comments, or want to know more
about the topic I covered in the
article "Small, But Big Savings in
The BIM Workflow", please
contact TeamCAD, who will be
happy to provide you with
additional information.
Also, if you want to automate the
BIM workflow on your projects
and you are not sure which way
to do it or what tools are best for
something like that, TeamCAD
will be happy to help you.
I thank you for reading "Small,
But Big Savings in The BIM
Workflow", and I am announcing
my next article "What are Digital
Twins".
Respectfully,
Predrag Jovanović
020 TeamCAD BIM
JAN 2021