TeamCAD BIM eBook v2 ENG

furniture industry, parts and
components of complicated
systems and in many other
industries.
*REMARK: In the meantime
Autodesk Configurator 360 Cloud
Service is being retired at the end of
May 2021. It will be further available
through the Autodesk Forge API.
His Majesty –
Autodesk Forge
If you have carefully read the
description and possibilities of
the above mentioned Cloud
solutions I hope that you have
noticed that all three Cloud
options are connected by one
thing. Namely, all three Cloud
project solutions are
characterized by a mutual project
environment for all of the
stakeholders, transparency of the
generated data, compatibility of
different formats integrated on
one platform, access to data
generated during all project
phases for all participants,
possibility of analysis and
visualization of data in the
common project environment,
etc. Does it seem to you that all
three before mentioned Cloud
solution are based on the same
platform? If your answer is “YES!”
you have guessed it right.
BIM 360, Fusion 360 and
Configurator 360 are all based on
the Autodesk Forge technology
and practically represent
different variations of Autodesk
Forge intended for different
demands when considering
project environment and data
type that are processed during
the project lifecycle.
But, despite the similarities with
BIM 360, Fusion 360 and
Configurator 360, Autodesk Forge
platform gives the possibility of
making web models, where all
the functionality of the BIM or
Digital Twin model, on all levels,
including the analysis and
visualization level, remains
available to all users, despite the
fact that it changes the format
when transforming from BIM or
Digital Twin model to Autodesk
Forge model. In this way,
Autodesk Forge gives the top
level management an option to
see all of the advantages of the
BIM and Digital Twins
technologies, without additional
learning in an easy and simple
way. Web model generated on
the Autodesk Forge platform, in
this way, really enables all project
process stakeholders, to check
any segment of the model, piece
of data or current state of the
project, via web model, using a
desktop computer, tablet or
smartphone.
We can safely conclude, thanks to
the Autodesk Forge platform it is
possible to realize full
cooperation and collaboration on
all levels, between all
stakeholders in the project
process, in a very simple intuitive
way, without huge effort to learn
BIM or Digital Twins technologies.
Until the next time,
Predrag Jovanović
094 TeamCAD BIM
JAN 2021