TeamCAD BIM eBook v2 ENG

manager for the effective
maintenance of the constructed
facility and the equipment built
into it.
Practically, there are no
restrictions on the parameters of
the digital twin model, so it can
be said that the user, the facility
manager and the company in
charge of creating and
maintaining the digital twin
model in the BIM Execution Plan
define all the parameters that are
valuable primarily to the facility
user.
However, it proved to be that the
data that are most often the
default parameters in the digital
twin model are related to the life
cycle costs of certain elements of
the facility and equipment,
different parameters that can
provide a quick response
regarding the cost of any changes
to the facility in terms of
upgrading, adaptation or change
of purpose of the facility or part
thereof and finally, the
parameters of the elements that
will signal incoming regular
construction work on the
maintenance of the facility and
the regular replacement of
equipment or parts of equipment
by the specifications of their
manufacturers.
It should be added that it is
possible to install different
sensors in a facility, which continuously
monitor and collect data
during the life cycle and the
facility exploitation, as well as the
equipment built into it, but this
requires the participation of
machine learning and Internet of
Things, for valid data processing,
which is a vast topic and I am
going to explain that workflow in
one of the following articles.
At the very end, I would like to
make a few observations and
conclusions about digital twin
technologies. The capabilities of
modern technologies are increasing,
and therefore the benefits
that digital tools provide us with
data processing, whether generated
by human labor, automation
tools or machine learning, are
increasingly apparent.
Essentially, any real-world flaws
can be remedied in digital
models, including the digital twin
model of a building.
The advantage of a digital model
of a building is that its elements
can be assigned much more
readily available data than the
elements of the building in the
real world.
It should be borne in mind that
the use of digital maintenance
technologies for an existing
facility, in addition to better
communication between the
facility manager and facility users,
also improves communication
JAN 2021
HTTPS://WWW.TEA
TeamCAD BIM
043