TeamCAD BIM eBook v2 ENG

visualization can be considered
as the key tool which enables us
to achieve considerable savings.
It is equally possible to save
during the BIM project process,
but also in the scenario when
we strive to optimize economic
and ecological aspect of building
exploitation.
But, Cloud and Autodesk Forge
platforms do not give us the
possibility of maximum
optimization only in the
industries in which we are used
to presence of BIM and Digital
Twins technology – like airplane
industry, shipbuilding,
construction, bio-mechanics,
etc.
Cloud based models using the
Autodesk Forge platform
enables us to, besides desktop
applications, make the
necessary analysis and
visualization of data in the
Cloud project environment, as
well as on the Autodesk Forge
platform.
When we want to analyze and
visualize the data from the BIM
or Digital Twins model, we can
use many tools and access
points, but in today`s article I
will focus on the most efficient
and mostly used data analysis
and visualization methods with
the potentially widest
application in various areas and
disciplines.
In the following part of the
article, I will address both
desktop solutions, as well as
Cloud solutions that give the
possibility of efficient BIM or
Digital Twins model data
analysis and visualization.
For the very end of this text, I
will write about Autodesk Forge,
as the platform where
everything is possible.
Mostly Used Tools
For BIM And Digital
Twin Model Analysis
And Visualization
Depending on the purpose for
which the Digital Twin model was
made, we can use different tools
that help us to process data most
efficiently in the Digital Twin
model. Despite mentioned, we
can roughly divide the Digital
Twin model data processing
methodology like so:
• CFD (Computational Fluid
Dynamics) is the calculation of
the fluid dynamics and it
represents part of the fluid
mechanics that as the basis of
the analysis considers numerical
analysis and structured data to
solve the problems connected to
fluid behavior in a liquid or
gaseous state. CFD analysis has
wide application including force
and force moments on various
digital models, pipe pressure
caused by matters in liquid and
gaseous state present in the
pipeline, explosion analysis,
motion and flow of different
particle types, temperature
impact, weather condition
simulations, the behavior of
digital models in air tunnel, etc.
• Dynamo is the digital tool that
is used for parametric
non-standard modeling,
generating of additional and
non-standard data for more
efficient calculations in the area
of BIM model, for processing,
manipulation and easier
visualization of generated data in
the BIM model, and for managed
data exchange between different
disciplines in the
multidisciplinary BIM project
process. Dynamo is the
programming language based on
the principle of visual
programming. The reason why it
is popular as a tool for BIM and
Digital Twin model data analysis
and visualization is that it is
integrated with the Autodesk
Revit platform and that there are
JAN 2021
HTTPS://WWW.TEA
TeamCAD BIM
091