magicolor 3730DN User's Guide - Konica Minolta
magicolor 3730DN User's Guide - Konica Minolta
magicolor 3730DN User's Guide - Konica Minolta
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7-26<br />
Symptom Cause Solution<br />
Not all pages<br />
print.<br />
Printer<br />
resets or<br />
turns off frequently.<br />
The printer has the<br />
wrong kind of cable,<br />
or the printer is not<br />
configured for the<br />
correct cable and<br />
port.<br />
The Cancel key was<br />
pressed.<br />
Check your cable.<br />
Make sure no one pressed the Cancel<br />
key while your job was printing.<br />
The tray is empty. Check that the trays are loaded with<br />
media, in place, and secure.<br />
A document is printed<br />
with an overlay file<br />
which has been created<br />
by an unsuitable<br />
driver.<br />
The machine tried to<br />
feed paper from Tray<br />
2 while paper is<br />
loaded into Tray 1.<br />
The power cord is not<br />
correctly plugged into<br />
the outlet.<br />
A system error<br />
occurred.<br />
Print the overlay file using a suitable<br />
driver.<br />
Paper cannot be fed from Tray 2 if<br />
paper is loaded into Tray 1. In order to<br />
use Tray 2, remove all paper from Tray<br />
1.<br />
Turn off the printer, confirm that the<br />
power cord is correctly plugged into the<br />
outlet, and then turn on the printer.<br />
Contact Technical Support with the<br />
error information.<br />
Solving Other Problems
Change language