magicolor 3730DN User's Guide - Konica Minolta
magicolor 3730DN User's Guide - Konica Minolta
magicolor 3730DN User's Guide - Konica Minolta
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
– Paper that has been printed on with a heat-transfer printer<br />
– Paper that has been printed on with any other printer or fax machine<br />
� Dusty<br />
� Wet (or damp)<br />
�� Keep media between 35% and 85% relative humidity. Toner does<br />
not adhere well to moist or wet paper.<br />
� Layered<br />
� Adhesive<br />
� Folded, creased, curled, embossed, warped, or wrinkled<br />
� Perforated, three-hole punched, or torn<br />
� Too slick, too coarse, or too textured<br />
� Different in texture (roughness) on the front and back<br />
� Too thin or too thick<br />
� Stuck together with static electricity<br />
� Composed of foil or gilt; too luminous<br />
� Heat sensitive or cannot withstand the fusing temperature (180°C<br />
[356°F])<br />
� Irregularly shaped (not rectangular or not cut at right angles)<br />
� Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons<br />
� Acidic<br />
� Any other media that is not approved<br />
Thick Stock<br />
Paper thicker than 90 g/m 2 is referred to as thick stock. You can print continuously<br />
with thick stock. However, this could affect the media feed, depending<br />
on the media quality and printing environment. If problems occur, stop the<br />
continuous printing and print one sheet at a time.<br />
Capacity Tray 1<br />
(Manual Feed<br />
Tray)<br />
1 thick stock sheet.<br />
Tray 2 Up to 20 thick stock sheets, depending on<br />
their thickness.<br />
Orientation Tray 1<br />
(Manual Feed<br />
Tray)<br />
Face down<br />
Tray 2 Face up<br />
Media Types 4-5
Change language