magicolor 3730DN User's Guide - Konica Minolta
magicolor 3730DN User's Guide - Konica Minolta
magicolor 3730DN User's Guide - Konica Minolta
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7-36<br />
This message... means... do this...<br />
PROCESSING The printer is processing<br />
data.<br />
READY The printer is on and ready<br />
to receive data.<br />
REBOOTING The printer is being<br />
restarted.<br />
WARMING UP The printer is warming up.<br />
WAITING While data is being processed,<br />
there was an interruption<br />
of at least one<br />
second in the data.<br />
Error Messages<br />
This message... means... do this...<br />
FUSER LIFE LOW The time to replace<br />
the fuser is near.<br />
FUSER LIFE END The fuser unit has<br />
reached the end of its<br />
life.<br />
INCORRECT<br />
X T/C<br />
The X toner cartridge<br />
is an unapproved<br />
type.<br />
SIZE MISMATCH The media size set in<br />
the printer driver is<br />
different from the<br />
size/type of media<br />
loaded.<br />
No action needed.<br />
Prepare the replacement<br />
fuser.<br />
Replace the fuser unit<br />
and reset the counter in<br />
the ENGINE SERVICE<br />
/ ENGINE SUP-<br />
PLIES REPLACE /<br />
SUPPLIES REPLACE<br />
FUSER UNIT menu.<br />
�� Printing can<br />
continue,<br />
however, the<br />
printing result are<br />
not guaranteed.<br />
Install a<br />
KONICA MINOLTA toner<br />
cartridge of the appropriate<br />
type (AM, EU, AP or<br />
GC). See page 5-7.<br />
Load media of the correct<br />
size.<br />
Status, Error, and Service Messages
Change language