magicolor 3730DN User's Guide - Konica Minolta

This message... means... do this...
SIZE/TYPE ERROR
DUPLEX
ERROR
VIDEO UNDER RUN
ERROR
FW DOWNLOAD
ERROR
MEMORY OVERFLOW
MEDIA JAM
DUPLEX LOWER
MEDIA JAM
DUPLEX UPPER
MEDIA JAM
TRANSFER ROLLER
MEDIA JAM
TRAY1
MEDIA JAM
TRAY2
MEDIA JAM
EXIT
MEDIA JAM
UNDEFINED
The loaded media
cannot be used with
duplex (double-sided)
printing.
The print image is too
detailed for the transmission
speed.
Firmware downloading
failed.
The printer has
received more data
than can be processed
with its internal
memory.
Media has misfed in
the duplex.
Media has misfed in
the duplex.
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the media
exit area.
Media has misfed in
Tray 1.
Media has misfed
while being pulled
from Tray 2.
A media misfeed has
occurred at the media
outlet slot.
A media misfeed has
occurred at an
unspecified location.
Make sure that the correct
media is being
used.
Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed, and
then try printing again.
Try downloading again.
Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed, and
then try printing again.
Refer to “Media Misfeed
Messages and Clearing
Procedures” on
page 7-6, and remove
the misfed media.
Status, Error, and Service Messages 7-39