magicolor 3730DN User's Guide - Konica Minolta
magicolor 3730DN User's Guide - Konica Minolta
magicolor 3730DN User's Guide - Konica Minolta
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7-28<br />
Symptom Cause Solution<br />
Media is<br />
wrinkled.<br />
The pages<br />
that were fed<br />
out were not<br />
uniformly<br />
loaded.<br />
The media is moist<br />
from humidity or having<br />
water spilled on it.<br />
Remove the moist media and replace it<br />
with new, dry media.<br />
The transfer roller or Check them for damage. If necessary,<br />
fuser unit is defective. contact Technical Support with the<br />
error information.<br />
Unsupported media<br />
(wrong size, thickness,<br />
type, etc.) is<br />
being used.<br />
There are large curls<br />
in the paper.<br />
There are gaps<br />
between the media<br />
guides of the paper<br />
tray and the sides of<br />
the paper.<br />
Use KONICA MINOLTA-approved<br />
media. See “Media Specifications” on<br />
page 4-2.<br />
Remove the paper from the paper tray,<br />
turn it over, and then load it again.<br />
Slide the media guides of the paper<br />
tray against the sides of the paper so<br />
that there are no gaps.<br />
Solving Other Problems