13.01.2013 Views

SERVICE MANUAL MR-G57N-T-NZ - B.d.t.

SERVICE MANUAL MR-G57N-T-NZ - B.d.t.

SERVICE MANUAL MR-G57N-T-NZ - B.d.t.

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

8<br />

DISASSEMBLY INSTRUCTIONS<br />

<strong>MR</strong>-<strong>G57N</strong>-<strong>NZ</strong><br />

Plug out before work!!<br />

Check the automatic ice-maker pressing ice making stop switch.<br />

In assembling & disassembling parts seven kinds of screws and rivets are used. Do not mistake to use them.<br />

4 12<br />

Stainless steel<br />

OPERATING PROCEDURE PHOTOS<br />

1. Elect cover Control board<br />

(1) Remove 5 screws fixing the elect cover and the rivet on the<br />

upper rear side of the refrigerator. (See photo 1)<br />

Control board<br />

4 12 (Black)<br />

With metal washer<br />

(2) Disconnect the connector to remove the control board.<br />

Caution on assembly<br />

4 16 (White)<br />

With plastic washer<br />

Firmly connect the lead wires and the connector. Ensure the<br />

wires are not pinched.<br />

2. Parts inside the refrigerator compartment: AUTOshelf<br />

(1) Remove two-way flexishelf from the refrigerator compartment.<br />

AUTO-shelf<br />

Move the lever to the right, and slide the AUTO-shelf to the<br />

uppermost position. (See photo 2)<br />

Push the catches (4 places) inward, and remove the AUTOshelf<br />

from the metal stoppers. Lift up and remove the AUTOshelf<br />

toward you. (See photo 3)<br />

Remove the metal stoppers in front, back, left, and right sides<br />

of the unit.<br />

Caution on assembly<br />

Specified screw<br />

First, install the metal stoppers to the unit. Then, place the<br />

AUTO-shelf on top, and push the AUTO-shelf downward until it<br />

clicks into place (4 places). Refer to Photo 4, 5 for the direction<br />

of the metal stopper installation.<br />

Photo 5<br />

Metal<br />

stopper<br />

42<br />

Photo 1<br />

Photo 2<br />

Photo 3<br />

Photo 4<br />

Rivet<br />

Lever<br />

Catches<br />

Metal<br />

stopper<br />

AUTO-shelf<br />

Rivet<br />

AUTO-shelf<br />

Rivet<br />

5 fixing screws<br />

Two-way<br />

flexishelf<br />

AUTO-shelf<br />

Elect cover<br />

Lever<br />

Catches<br />

Catches Catches<br />

Ceiling of slide<br />

chilled compartment<br />

Metal<br />

stopper<br />

Catch

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!