SEC-400series - Shavo Technologies

25
GAS
FI-1100
Control unit with integration function
In addition to a drive power source, flow rate display and setting functions,
and flow rate signal and alarm output functions for mass flow controllers
(SEC, LV series), the FI-1100 control unit features a flow rate control
integration function. It is ideal for monitoring the amount of gas being
consumed. It also features a flow rate output (digital/analog) function, and
an integrated flow rate alarm (contact point output) function.
DU-102E/K
Display unit
The DU-102E and DU-102K display the flow rate output signal from
mass flow controllers and meters. Matching these units to the full-scale
flow rate values of mass flow controllers and meters enables direct
monitoring of control and measured flow rates.
DS-3
Multifunctional digital controller
The DS-3 is a compact display and settings unit for mass flow
controllers (DIN 48 x 48 mm). It displays both the actual flow rate
value and the flow rate setting value simultaneously, and is equipped
with a conversion factor value setting and valve control function
(control condition settings: fully open/fully closed). It can also
communicate digitally with digital mass flow controllers.
PAC series
Dedicated power sources
The PAC series of dedicated power sources can be used as drive
power sources for mass flow controllers and meters as well as for
dedicated display units, and supply the standard flow rate setting
voltage. The series includes a lineup of models to suit different needs,
including models that are capable of driving up to six units, and
models offering 0 to 5 VDC signals and 4 to 20 mA.
SU-502EA/ED
Settings units
Dedicated power source: These settings units convert the standard flow
rate setting voltage input (+5 VDC) from the PAC series to the desired
type of flow rate setting signal and input that to the mass flow controller.
SU-502ED: Digital SE-502EA: Analog
SC/CA series
Signal cables and conversion adapters
The SC series consists of signal cables that connect mass flow controllers and
meters to control units. The SC-A, SC-DH2, and SC-EH2 are compatible with
the SEC-7300/4001/8000/E400J, UR-730, and PC-1000 series. The SC-A4,
SC-D4, and SC-E4 are compatible with the SEC-400 and SEC-2000 series.
The SC-D6 and SC-E6 are compatible with the SEC-6470 and SEC-6480.
The CA series are conversion adapters that can be utilized when other
manufacturers mass flow control systems are used with mass flow controllers
and meters. Simply select the appropriate adapter for your needs.