1 - Cash Registers

*: Item: Selection: Entry:
A Commission group number 0-2 (0: Non commission)
B PLU/subdepartment selection Subdepartment 0
PLU 1
3
When you program the last PLU code, the programming sequence will be complete with a press of
the s key.
Based on each clerk’s sales total of each commission group and the corresponding commission rate, the
commission amounts are calculated, which is printed on clerk reports.
Commission rate
s
4
You must use a decimal point when setting a fractional rate.
The cash register provides miscellaneous keys such as % , & , - , f , r , R , V , t , C , X , Y and
A . While the cash register is pre-programmed so you can use these keys, you must set a currency
conversion rate to use V key. You can also program these keys for more convenient use. Please refer to the
data below for programming these keys. Factory setting is indicated with parentheses.
% , &
-
f
r , R
V
Key operation example
1 p
10 sA
Commission Rate Programming
Key operation example
s 28 @
1 @
15 sA
Miscellaneous Key Programming
Print
Print
Commission group
PLU/subdept.
Commission
Commission rate
28 @ number (1 or 2) @ (0.00 - 999.99) s A
Percent rate (0.00%), tax status (non-taxable), sign (minus), item % and subtotal %
entry* (both are allowed), percent rate limitation (100%)
Amount (0.00), tax status (non-taxable), sign (minus), item _ and subtotal _ entry*
(both are allowed), entry digit limit (7 digits)
Not necessary to program
Entry digit limit (9 digits)
Currency conversion rate (0.0000), currency conversion rate entry method - open or
preset (both are enabled)
www.cashregisters.net
35