1 - Cash Registers

54
Training clerk specification for training mode
For the details of clerk training, please refer to “TRAINING MODE” on page 56.
AUTO key programming — Automatic sequencing key
If you program frequently performed transactions or report sequences for the a key, you can call those
transactions and/or reports simply by pressing the a key in key operations.
Programming for a ; entering a PLU 2 item (programmed unit price: 1.50) and a dept. 6 item (unit price: 1.00)
4
AUTO
setting
s 86 @
Key operation example
s 86 @
20 sA
Delete
Transaction a a A
max. 25 times
Key operation example
a
2 p 100 § aA
To cancel
Clerk code
(1 to 20) s A
Print
Print
When the a key has been programmed to execute a report job function etc., the mode switch
must be in the appropriate position (REG, MGR, OPX/Z, X1/Z1 or X2/Z2).
Reading Stored Programs
The machine allows you to read every program stored in the PGM mode.
Key sequence for reading stored program
Report name Key sequence
Programming report 1 A
Programming report 2 2 A
Auto key programming report 1 A
Printer density programming report 3 A
PLU programming report Start PLU code @ End PLU code p
To stop reading PLU programming report, turn the mode switch to the MGR position.
www.cashregisters.net