system placement - Bose

BASIC SYSTEM CONNECTIONS
14
Dansk Deutsch Español Français Italiano Nederlands Svenska
English
BASIC SYSTEM CONNECTIONS
Figure 6
Speaker connections to the
Acoustimass ® module
2 Connect the speaker cables to the module
You may find it convenient to temporarily turn the module upside down while making these
connections. Then, be sure to place the module on its side or bottom surface when the
connections are completed.
CAUTION: Before you make these connections, be sure that the media center and the
Acoustimass ® module are NOT yet connected to an AC (mains) power outlet.
The RCA plugs on the free end of the speaker cables are colored to match the colored
speaker connectors on the Acoustimass connection panel. For a color reference, you may
want to use the Quick Setup Guide provided in the carton.
A. Connect the front speaker cables to the Acoustimass module (Figure 6):
Plug the white front left (L) cable into the white Front L connector.
Plug the light blue front right (R) cable into the light blue Front R connector.
Plug the brown front center (C) cable into the brown Front C connector.
B. Connect the rear speaker cables to the Acoustimass module (Figure 6):
Plug the light green left rear (LR) cable into the light green Rear LR connector.
Plug the purple right rear (RR) cable into the purple Rear RR connector.
Right Rear Right Front Center Front Left Front Left Rear
RR
R C L LR
Acoustimass module connector panel
If you need longer cables:
To lengthen speaker cables, as needed, you can splice in 18-gauge or thicker cord
(connecting + to + and – to –). Or, you can order heavy-duty speaker extension cables from
Bose. To contact Bose directly, refer to the contact list provided in the carton.