system placement - Bose
system placement - Bose
system placement - Bose
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BASIC SYSTEM CONNECTIONS<br />
18<br />
Dansk Deutsch Español Français Italiano Nederlands Svenska<br />
English<br />
BASIC SYSTEM CONNECTIONS<br />
Figure 10<br />
VS-2 input connections<br />
6 Connect video source outputs to VS-2 video inputs<br />
The VS-2 has video input connectors for a cable/satellite box (CBL-SAT), a VCR, and one<br />
other source (AUX). The type of video connection used for your TV determines the type of<br />
connection you can use for a video source:<br />
If the connection you made to your TV is:<br />
HDMITM ............ use any type of connection for your sources.<br />
Component.... use a component, S-Video, or composite video source connection.<br />
S-Video........... use either an S-Video or composite video source connection.<br />
Composite ..... use either an S-Video or composite video source connection.<br />
AUX<br />
CBL•SAT<br />
VCR<br />
Not available on<br />
VS-2 AUX IN<br />
VCR<br />
CBL•SAT<br />
AUX<br />
To TV<br />
Note: If after turning on your<br />
<strong>system</strong> you can’t view cable/<br />
satellite programs through an<br />
HDMI connection, you may need<br />
to change the video output setting<br />
in your cable/satellite box. To<br />
do this, use another type of video<br />
connection so you can view the<br />
onscreen menu from your cable/<br />
satellite box. Then change the<br />
connection back to HDMI.