system placement - Bose
system placement - Bose
system placement - Bose
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REFERENCE<br />
REFERENCE<br />
34<br />
Deutsch Español Français Italiano Nederlands Svenska<br />
English<br />
Mounting the VS-2 video enhancer<br />
For convenience, the VS-2 video enhancer can be mounted on a wall.<br />
Required tools<br />
Required hardware<br />
For solid wood<br />
1<br />
8-inch<br />
(3.5 mm) drill bit<br />
For wallboard<br />
Use drill size specified<br />
for type of wall anchor<br />
used.<br />
Wall mounting<br />
Install two screws 12 inches apart. Leave 5 /16 1<br />
inch<br />
(7.9 mm) between wall surface and screw head.<br />
12"<br />
(30.5 cm)<br />
5 /16"<br />
(7.9 mm)<br />
No. 8 x 1½-inch<br />
(S6 x 36 mm)<br />
wood screws<br />
No. 8 (S6)<br />
wall anchor<br />
No. 8 x 1½-inch (S6 x 36 mm)<br />
wood or machine screws<br />
(depends on type of wall anchor)<br />
2<br />
Position the VS-2 mounting holes<br />
over the screws so that it is flush<br />
with the wall.<br />
3<br />
Lower the VS-2 onto the<br />
screws to lock it in place.
Change language