You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Automatic adjustment<br />
If the lens used has the corresponding identification and the respective information<br />
is transmitted to the LEICA <strong>SF</strong> <strong>58</strong> by the camera (see the corresponding<br />
instructions), the position of the main reflector adjusts automatically to the<br />
lens’ focal length. In general, the flash unit is set to automatic adjustment every<br />
time it is switched on - and after the camera is activated by pressing the shutter<br />
release button.<br />
This is equally true in the case of the <strong>Leica</strong> M 8 / M 8.2 models with their smaller<br />
image format compared to the 24 x 36 mm format. This is incorporated with the<br />
automatic adjustment. Example: With a 21 mm lens, the main reflector is set to<br />
its “28” position. „A-Zoom“ and the reflector position are displayed on the<br />
monitor of the flash unit.<br />
Manual adjustment<br />
Irrespective of whether digital data transmission occurs between the camera<br />
and the flash unit or not (e.g. with lens without identification), the main reflector<br />
can also be set manually.<br />
„MZoom“ and the reflector position set appear on the monitor of the flash unit.<br />
Setting (see also “Menu navigation / setting the functions”, p. 46)<br />
1. In the exposure parameter menu Set , select the menu item “Zoom” and<br />
2. there the desired value. The setting will take effect immediately.<br />
49<br />
Softer illumination<br />
In „SOFT “ mode the focal length of the main reflector is reduced by one<br />
step compared to the focal length of the camera lens. The resulting wider illumination<br />
provides additional diffuse lighting (reflections) inside rooms and<br />
thus results in a softer flash illumination.<br />
Example:<br />
The focal length of the camera lens is 50 mm. In „SOFT “ mode the flash<br />
unit sets the main reflector to 35 mm.<br />
50 mm continues to be displayed on the monitor of the flash unit.<br />
Setting the function (see also “Menu navigation / setting the functions”, p. 46)<br />
1. In the basic settings menu Menu<br />
, select the function on „SOFT “ and<br />
2. there whether you wish to switch on the function on “SOFT ON” or off<br />
“SOFT OFF”.<br />
When the „SOFT “ mode is activated, apart from the focal length (2.12),<br />
“ASoft” or „MSoft“(2.11, depending on the set mode) is displayed on the<br />
monitor.<br />
For system requirements, the „SOFT “ mode is supported for lenses with<br />
nominal focal lengths as of 28 mm.<br />
english