Manuale Operatore Operator's Manual Manuel d'utilisation ...

CONTROL PANEL
6
“Short” program
“Normal” program
“Intensive” program
Forced drying option
disabled
(LED off)
Display Two-lines display showing data and messages.
In the standby status it displays the temperature value.
After the Start, it displays the current temperature value.
In “Block” status, it displays the alarm message relating the type of fault.
Buzzer Continuous tone upon pressure of any key in the control panel,
and intermittent tone in Block status.
LCD Display
START key
STOP key
“Failed sterilization”
indication
“Cycle complete”
message
Access to
programming menu
On/Off switch