capaNCDT 6100 - Micro-Epsilon

Functional Principle, Technical Data2.2StructureThe non-contact, single-channel measuring system of the capaNCDT 6100 installed in an aluminium housing,consists of:-- Controller-- Sensor and-- sensor cable.The controller consists a connecting board and a signal conditioning board which are both enclosed in themetal housing.The board also contains the „zero“ and the „gain“ potentiometers which are used for adjusting the zero pointand the gain. This allows optimization of the current measuring task.The connecting board contains the 8-pin connector, reverse polarity protection and various protection elementsfor the connections which are necessary to satisfy the EMC regulations.The output signal can only be displayed externally.Power supply,output signalEnglishSynchronization inputSensorSynchronization outputFig. 2 Measuring system capaNCDT 6100capaNCDT 6100Page 39