capaNCDT 6100 - Micro-Epsilon

Maintenance6.MaintenanceMake sure that the sensor surface is always clean.Switch off the power supply before cleaning.Clean with a clamp cloth; then rub the sensor surface dry.Disconnect the power supply before touching the sensor surface.>>Static discharge>>Danger of injuryChanging the target or very long operating times can lead to slight reductions in the operating quality (longtermerrors). These can be eliminated by recalibration, see Chap. 5.3.In the event of a defect on the controller, the sensoror the sensor cable please send us the effectedparts for repair or exchange. In the case of faultsthe cause of which is not clearly identifiable, sendthe whole measuring system back toMICRO-EPSILON MESSTECHNIKGmbH & Co. KGKönigbacher Str. 15D-94496 Ortenburg / GermanyTelefon: +49/8542/168 - 0Fax: +49/8542/168 - 90info@micro-epsilon.dewww.micro-epsilon.comEnglishcapaNCDT 6100Page 59