Deep Freeze Enterprise User Guide - Faronics
Deep Freeze Enterprise User Guide - Faronics
Deep Freeze Enterprise User Guide - Faronics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Example 2 - Multiple Subnets One local service<br />
Example 2 - Multiple Subnets One local service| 105<br />
In this environment, the clients are located across more than one subnet. There is still only one<br />
Console being used. This environment does not require a Remote Console, although one could be<br />
used. The following diagram shows the network topology:<br />
In this scenario (similar to Example 1 - Single Subnet) both the clients and the connection hosted<br />
by the Console are using the same port. This port is configured in the <strong>Deep</strong> <strong>Freeze</strong> Configuration<br />
Administrator in the Advanced Options tab, before creating the Workstation Install file or<br />
Workstation Seed.<br />
In order for the clients to be seen, they need to be configured to use a LAN/WAN connection.<br />
When the LAN/WAN option is selected, a Console IP field appears. Specify the IP of the machine<br />
that will run the <strong>Enterprise</strong> Console. An example of these settings are shown in the Advanced<br />
Options tab below:<br />
<strong>Deep</strong> <strong>Freeze</strong> <strong>Enterprise</strong> <strong>User</strong> <strong>Guide</strong>