Open Edit File Location : Embf PC Built-in ATA A Card USB memory CD ROM PC 89 Direct PC-Link Connecting the machine and PC The MC 11000 can be connected to the PC with the USB cable included in the standard accessories. You need to install the USB driver for the MC 11000 and the PC Folder Tool on your computer. The USB driver and PC Folder Tool are available in the MC11K Tools CD-ROM included in standard accessories. The PC Folder Tool allows you to transfer the data bilaterally between the machine and PC. NOTE: Refer to the instruction booklet of the MC11K Tools CD-ROM for more details. Start up the MC 11000 and PC, and insert the type “A” USB connector into the PC. Insert the type “B” connector into the MC 11000. Press the PC-link tab to establish the communication between the MC 11000 and PC. Now, you can save and open the files, or transfer the data between the MC 11000 and PC. CAUTION: Do not turn the power off or disconnect the USB cable while the data transfer is in progress. Otherwise the data will be lost or the memory will be damaged.