Installation and start-up - Stange Energietechnik GmbH

2.6 Notes for warranty and liability
Camino Generator
• Have repair and maintenance work carried out by a specialised workshop approved
by SET.
• SET will not accept responsibility and liability for work carried out by third party’s
personnel.
• The „General Terms and Conditions of Sale and Supply“ of SET shall be applicable
in any case. They will be provided to the owner when signing the contract at
the latest.
Warranty and liability claims for personal and property damage shall be excluded if
due to one or several of the following causes:
• Use of the generator for purposes other than the intended.
• Improper assembly, start-up, operation and maintenance of the generator.
• Operating the generator with defects.
• Non-compliance with the notes in the operating manual concerning transport,
storage, assembly, start-up and maintenance.
• Unauthorised structural modification to the generator.
• Poor monitoring plant components which are subject to wear.
• Improperly carried out repair work, use of third party’s components.
• Catastrophes due to the effects of foreign bodies and Force Majeure.
2.6.1 Storing the generator
No warranty claims will be accepted by SET GmbH for corrosion damage and frost
damage due to improper storage, such as moist rooms or the like.
2.6.2 Claims
No replacement or warranty claims will be accepted for improper transport. In case
of doubt, contact the manufacturer prior to transport.
2.6.3 Figures and drawings
Are used for general illustration and shall not be decisive for the construction of individual
components. The dimensions specified shall not be binding.
2.6.4 Protected rights
Any right in drawings and other documents as well as any disposal right such as
copy and disclosure rights shall remain with SET GmbH, even in case of the application
of protected rights.
03-04-01 Basic safety notes 2-12