Installation and start-up - Stange Energietechnik GmbH
Installation and start-up - Stange Energietechnik GmbH
Installation and start-up - Stange Energietechnik GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.4.3 Piping at the cooling circuit „engine“<br />
Camino Generators<br />
Engine cooling is operated via the closed engine cooling circuit with s<strong>up</strong>ply <strong>and</strong> return<br />
lines by means of a coolant pump.<br />
• Mount the coolant pump (4) at the s<strong>up</strong>ply line (2) of the cooler (1).<br />
From the coolant pump to the s<strong>up</strong>ply socket (6) use hoses* <strong>and</strong>/or pipelines.<br />
Observe the position of installation of the coolant pump (refer to Figure)<br />
• Connect the piping of the return line (3) direct at the cooler.<br />
Connect the s<strong>up</strong>ply line connection (5) at the SET Camino Generator housing<br />
with the cooler via hoses <strong>and</strong>/or pipelines.<br />
Hose connections shall be of pressure <strong>and</strong> suction resistant dia 28<br />
coolant hose <strong>and</strong> the hose ends shall be mounted by means of suitable<br />
clips.<br />
03-04-01 <strong>Installation</strong> of the SET Camino Generator 5-37
Change language