Installation and start-up - Stange Energietechnik GmbH
Installation and start-up - Stange Energietechnik GmbH
Installation and start-up - Stange Energietechnik GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Camino Generators<br />
4. Connect the s<strong>up</strong>ply line (4) via Diesel free pipelines/fuel hose NW8 <strong>and</strong>...<br />
− non-return valve* (5) (...prevents the fuel from returning <strong>and</strong> thus draining of<br />
the s<strong>up</strong>ply line)<br />
− shut-off valve ¼“ * (6)<br />
− electrical fuel delivery pump* (7) (...to be mounted near the Diesel tank)<br />
− water separator* (8) direct downstream of the electrical fuel delivery pump.<br />
Leave sufficient space for filter replacement/cleaning. (From SET range of<br />
accessories)<br />
to the connection line (9) of the SET Camino Generator.<br />
* (refer also to the documents of sub-s<strong>up</strong>pliers)<br />
The end of the return line shall end slightly above the tank bottom.<br />
Thus the line end is always filled with fuel <strong>and</strong> the lines are prevented<br />
from draining.<br />
Prior to <strong>start</strong> <strong>up</strong> <strong>and</strong> on completion of assembly check the whole fuel<br />
system for leaks.<br />
03-04-01 <strong>Installation</strong> of the SET Camino Generator 5-43