Installation and start-up - Stange Energietechnik GmbH

More documents

Recommendations

Info

3.9 Exhaust gas system Camino Generator • All components of the exhaust system used must be of heat-resistant material and installed according to fire prevention standards. Use original SET installation parts only. • The required dimensions must be kept 3.10 Cooler unit • Suction-proof hose only shall be used. • The required dimensions must be kept. • Check the coolant at the expansion vessel at regular intervals. • The cooling air inlet must have at least the 1.2fold of the area of the cooler. • The cooling air outlet (free outlet) must have at least the area of the cooler. Please ensure to increase the cooler air outlet area when using louvres. 03-04-01 Preparation for installation 3-20
4 Installation data 4.1 Technical data 4.1.1 Technical data „SET Camino Generator“ CAMINO 8 Manufacturer SET Output (...kW; cos.phi 1*) 5,5 kW Voltage (...V ± 6%) 230V Amperage (single-phase operation) 25 A Battery charge 14 V - 11 A Coolant filling (water with anti-freezing agent) Cooling water required (for direct cooling) 8 l 20 l / min Type of protection IP 54 Insulation class "F" Frequency 50 Hz +/- 3 % CAMINO 8 Manufacturer SET Output (...kW; cos.phi 1*) 5,5 kW Voltage (...V ± 6%) 230V Amperage (single-phase operation) 12.8 / 35 A Battery charge 14 V - 20 A Coolant filling (water with anti-freezing agent) Cooling water required (for direct cooling) 8 l 20 l /min Type of protection IP 54 Insulation class "F" Frequency 50 Hz +/- 3% Sound level ... dB(A) 54 Camino Generators • The full output can be achieved only after a running in phase of approx. 50 hours of operation. • The short-circuit proof, self-exciting revolving-field generator can be overloaded to 10 % for a short period of time. • For three-phase generators, load unbalance up to 80 % is possible. 03-04-01 Installation data 4-21
Page 1 and 2: Installation and start-up manual SE
Page 3 and 4: Table of contents Camino Generators
Page 5 and 6: 1 Introduction Camino Generators Pr
Page 7 and 8: Camino Generators 8. The unit shall
Page 9 and 10: 2.3 Basic duties Camino Generators
Page 11 and 12: 2.5 Hints for specific types of dan
Page 13 and 14: 2.6.5 Environmental protection Cami
Page 15 and 16: 3.2 Protective measures against mec
Page 17 and 18: 3.4.2 Electrical installation of th
Page 19: 3.8 Safety notes, summary Camino Ge
Page 23 and 24: • 4.2 Technical installation data
Page 25 and 26: 4.3 Dimensions „cooler unit examp
Page 27 and 28: 4.4.2 Cooling system connections Ca
Page 29 and 30: 4.4.4 Exhaust gas system connection
Page 31 and 32: 5 Installation of the SET Camino Ge
Page 33 and 34: 5.3 Foundation Camino Generators A
Page 35 and 36: 5.4.1 Direction of delivery of the
Page 37 and 38: 5.4.3 Piping at the cooling circuit
Page 39 and 40: 5.5 Installation of external air fi
Page 41 and 42: 5.7 Installation of the fuel system
Page 43 and 44: Camino Generators 4. Connect the su
Page 45 and 46: 6.1 Installation of control panel C
Page 47 and 48: Terminal box Line 1 = + 12 V Line 2
Page 49 and 50: 6.3 Electrical system of the vehicl
Page 51 and 52: 6.5 Mounting and installation of th
Page 53 and 54: 7 Initial start-up Camino Generator
Page 55 and 56: 7.2 Operation General Camino Genera
Page 57 and 58: 7.3.1 For initial start proceed as

Installation and start-up - Stange Energietechnik GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?