Installation and start-up - Stange Energietechnik GmbH
Installation and start-up - Stange Energietechnik GmbH
Installation and start-up - Stange Energietechnik GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.5 <strong>Installation</strong> of external air filter (Option)<br />
Camino Generators<br />
The place of installation for the external air filter* (1) should be selected at a place<br />
which is flown through properly by dry air near the SET Camino Generator.<br />
Connect the external air filter* at the socket (2) of the (SET Camino Generator<br />
housing) via hoses <strong>and</strong>/or pipes (3).<br />
Install the hose lines <strong>and</strong>/or pipings without kinks. Mount the hose<br />
ends by means of the enclosed clips. The air filter must not come in<br />
contact with road dirt.<br />
* The external air filter is not included in the scope of s<strong>up</strong>plies <strong>and</strong> should be ordered<br />
separately, if necessary. The required hose length should also be defined<br />
then.<br />
03-04-01 <strong>Installation</strong> of the SET Camino Generator 5-39
Change language