Programmier- anleitung DoorCom® Analog DCA 650-02 ... - Siedle

Programming structure
DCA 650-02 V 2.x
S. SIEDLE & SÖHNE
OK Esc
Sprache/Language
ändern/change
Esc
Enter PIN
0000
1 System config.
change with
PIN setting
change with
Door parameter
change with
Publ. nwk. param.
change with
Concierge fct.
change with
Sprache
Deutsch
2 Register new
user with
Registering user
Please wait!
The unassigned user
addresses of the
In-Home bus system
are read out.
Programming procedure
page 21.
DoorCom ® Analog
DCA 650-02
The DCA 650-… is a high-powered
interface used to actuate a door
intercom system at a telecommunication
system.
In a large number of systems, it will
certainly only be necessary to carry
out a few essential programming
steps for commissioning purposes.
Select language:
Deutsch
English
Francais
Italiano
Dansk
Nederlands
OK
save
and return with
3 User config.
change with
User 1
change with
Direct call no.
change with
Chain call no.
change with
Chain call fct.
change with
However, the system and the perfor
mance features can be upgraded
at any time without problems and
so additional uses can be integrated
at a later date as required.
Standard settings which are
essential during commissioning:
Menu points 2
Registering new users
4
In-home function
change with
Call btn assignm
change with
Dir. door select
change with
BSx actuation
change with
5
Service function
change with
OK Esc OK Esc OK Esc OK Esc OK Esc
Default status
change with
Door call accept.
change with
Service receiver
change with
Call btn assignm
test with
Localization
change with
Extended functions with
supplementary uses
In order to make full use of all the
performance features, all the menu
points must be looked at individually
and changed where appropriate.
3