Operating Instructions - VEGAPULS 54K enamel

Measuring range 1)
Standard 0 … 20 m
Output signal
Technical data
4 … 20 mA current signal in two or four-wire technology
Fault signal current signal unchanged,
20.5 mA, 22 mA (adjustable)
Integration time 0 … 999 seconds (adjustable)
Two-wire technology 4 … 20 mA:
The analogue 4 … 20 mA output signal (measuring signal) is transmitted together with the
power supply via one two-wire cable.
Four-wire technology 4 … 20 mA:
Separate power supply. The analogue 4 … 20 mA output signal (measuring signal) is transmitted
in a cable separate from power supply.
Measured value display (optional)
Liquid crystal indication
-
ured values as graph
in the sensor
and number
scalable output of meas-
- in the external indicating instrument
powered by the sensor scalable output of
measured values as graph
and number. The display unit can be mounted
up to 25 m away from the sensor
Adjustment
- PC and adjustment software VEGA Visual Operating
- adjustment module MINICOM
- HART ® handheld
Accuracy 1)
(typical values under reference conditions, all statements relate to the nominal measuring
range)
Characteristics linear
Resolution, general max. 1 mm
Resolution of the output signal 1.6 µA or 0.01 %
Accuracy see diagram
20 mm
10 mm
-10 mm
-20 mm
1,0 m 30 m
Adjustment time > 2 s (dependent on the parameter adjustment)
1) Min. distance of the antenna to the medium 5 cm
2) Similar to DIN 16 086, reference conditions acc. to IEC 770, e.g.
temperature 15 °C … 35 °C; moisture 45 % … 75 %; pressure 860 mbar … 1060 mbar
40 VEGAPULS 54K enamel
24 101-EN-041227