HELLA - Lighting catalogue

Light Series
External-fitting work lights
Oval 100 Xenon Integral
Lens pattern for wide close-range illumination.
With gas discharge bulb.
Light aperture: 130 x 75 mm.
Recommended angle of inclination: 8° - 15°.
Reflector made of diecast aluminium, glued to hardened glass lens.
Black plastic body with extending edge to protect lens.
Xenon-electronic unit 42W integrated into body.
Without connecting lead (see accessories).
Pivot range vertical 105°.
Type of protection: IP5K4K and IPX9K.
Part no.
Pk.
1GA 996 261-531 1
1GA 996 261-691 1 for pendant mounting
1GA 996 261-561 1
1GA 996 261-571 1 and 24V ballast unit
1GA 996 261-701 1
1GA 996 261-711 1
Xenon work light
with DEUTSCH plug connector,
24V ballast unit and black lens-retaining rim,
pivot base with bracket for four-point mounting
made of stainless steel.
for upright mounting
Xenon work light
with pivot base with bracket
for four-point mounting made of stainless steel,
for upright mounting,
with AMP plug connector and
and 12V ballast unit
Xenon work light
with mounting bush for 24 mm dia. standard pin
for upright mounting,
with AMP plug connector
and 24V ballast unit
Xenon work light
with handle, switch and magnet base
for upright mounting,
with AMP plug connector
and 12V ballast unit
8GS 009 028-021 1
Spare parts/Accessories:
D1S gas discharge bulb, 35W
3700 mm long connecting lead with relay,
15A fuse and DEUTSCH plug connector,
8KB 990 299-221 1 12V
8KB 990 299-231 1 24V
3700 mm long connecting lead with relay,
8KB 990 299-121 1 15A fuse and AMP plug connector, 24V
8JD 008 151-011 10 Socket for AMP plug connector
8KW 701 235-033 100 Blade receptacles, 6.3 mm
8JS 711 687-821 1 Blade-type fuses, 15A (5 pcs.)
Mounting bracket for tubular mount on
8HG 990 263-111 1 15 mm - 28 mm dia. pipes
Accessories see page 4.123 - 4.125
4.58 LHT 11