HELLA - Lighting catalogue

External fitting work lights for upright mounting
Oval 100 Xenon Integral
Lens pattern for wide off-road illumination.
With gas discharge bulb.
Light aperture: 130 x 75 mm.
Recommended angle of inclination: 3° -10°.
Reflector made of diecast aluminium, glued to hardened glass lens.
Black plastic body with extending edge to protect lens.
Xenon-electronic unit 42W integrated into body.
Without connecting lead (see accessories).
Pivot base with bracket for four-point mounting
made of stainless steel.
Pivot range vertical 105°. Type of protection: IP5K4K and IPX9K.
Part no.
Pk.
1GA 996 261-581 1
Xenon work light
with AMP plug connector and 12V ballast unit
8GS 009 028-021 1
Spare parts/Accessories:
D1S gas discharge bulb, 35W
3700 mm long connecting lead with relay,
8KB 990 299-121 1 15A fuse and AMP plug connector, 12V
8JD 008 151-011 10 Socket for AMP plug connector
8KW 701 235-033 100 Blade receptacles, 6.3 mm
8JS 711 687-821 1 Blade-type fuses, 15A (5 pcs.)
Mounting bracket for tubular mount on
8HG 990 263-111 1 15 mm - 28 mm dia. pipes
Oval 100 H9 with FF® reflector
Part no.
Pk.
1GA 996 161-391 1 FF®-H9 work light
8GH 008 357-001 1
Spare parts/Accessories:
H9 bulb, 12V65W
9XD 990 298-001 5 Bracket for four-point fixing
2000 mm long connecting lead,
8KB 990 299-311 1 with plug for connecting the H9 bulb
9GH 990 334-011 1 Rubber cap for H9 socket
Mounting bracket for tubular mount on
8HG 990 263-111 1 15 mm - 28 mm dia. pipes
Accessories see page 4.123 - 4.125
Light Series
Lens pattern for wide off-road illumination.
With 12V bulb, accessible from the outside.
Light aperture: 130 x 75 mm.
Recommended angle of inclination: 3° - 10°.
Reflector made of diecast aluminium, glued to hardened glass lens.
Black plastic body with extending edge to protect lens.
Vibration-damped pivot base with bracket for four-point mounting.
Pivot range vertical 105°.
With 2000 mm long connecting lead.
Type of protection: IP5K4K.
LHT 11
4.59
4