HELLA - Lighting catalogue

Indicator Lights
For flush mounting
For front mounting (category 1).
In LED-technology. With 1 LED 3.0W, 200 mm lead and
three fixing screws with cover caps.
Type of protection: IP6K. Voltage range: 9V - 33V.
Consumption: 0.25A at 12V, 0.125A at 24V.
See LED instruction 3.
Part no.
Pk.
2BA 959 932-051 1
Indicator light
with clear PC lens
2BA 959 932-011 1 with amber PC lens
2BE 959 932-131 1
2BA 009 204-041 1
Indicator-position light
with clear PC lens
For horizontal surface mounting
"Without patented electronics for indicator failure control.
Indicator failure control is not mandatory for lifting loading platforms."
For rear mounting (category 2a) of lifttype loading platforms.
In LED-technology.
With 2 amber LEDs. Clear lens.
Consumption: 0.33A at 12V/24V.
Die-cast zinc body.
Two holes for M6 fixing screws.
With 190 mm potted lead. Type of protection: IP5K9K.
Part no.
Pk.
Indicator light,
12V4.0W
2BA 009 204-051 1 24V8.0W
2BA 009 204-057 20
"Without patented electronics for indicator failure control.
Indicator failure control is not mandatory for lifting loading platforms."
For rear mounting (category 2a) of lifttype loading platforms.
In LED-technology.
With 12 amber LEDs 2.8W. Clear lens.
Consumption: 0.24A at 12V, 0.12A at 24V.
Die-cast zinc body. Two M6 fixing screws.
With potted leads. Type of protection: IP5K9K.
Part no.
Pk.
2BA 008 260-017 1
2BA 008 260-001 1 24V
2BA 008 260-007 20
Indicator light,
12V
5. 178 LHT 11