HELLA - Lighting catalogue

Accessories
Mounting bushes 24 mm dia
for Matador 1G4 003 470-147,
Ultra Beam 1GA 007 506-681 and bracket
attachment foot 8HG 990 320-001.
With socket to DIN 72 591 and
rubber protective cap.
Part no.
Pk.
8HG 002 365-001 1
Mounting bush for mounting on support side of
the vehicle or for welding to a flange,
24 mm dia., approx. 100 mm,
with ground contact through the pipe
8HG 006 294-101 1 with separate ground connection
Spare parts/Accessories:
8HG 096 531-007 2 Mounting bush for -001
8JB 850 434-011 10 Socket for -001
9GH 096 532-001 10 Rubber cap
8HG 006 294-051 1
Mounting bush with screw fixing
and ground contact through the pipe
8HG 006 294-091 1 and separate ground connection
8HG 006 294-011 1
8HG 006 294-021 1
For screwing onto horizontal cabin roofs
(on top)
Mounting bush for screwing onto horizontal
cabin roofs (on side)
with 90 mm mounting bracket
8HG 006 294-111 1 with 50 mm mounting bracket
8HG 006 294-031 1
8HG 006 294-041 1
8HG 990 368-001 1
8HG 990 368-007 25
9XD 990 284-001 1
Spare parts:
8JB 850 434-011 10 Socket
9GH 096 532-001 10 Rubber cap
9NM 863 332-001 1
Mounting bush for screwing onto horizontal
cabin roofs (on top or on side).
Swivelling holder
Length: 1000 mm.
Extension: up to 700 mm.
For screwing onto back of cabin roof.
Telescopic holder
Black, with M8 thread. Length: 220 mm.
Mounting bush
Work Lights
With stopper for screwing to vertical
vehicle surfaces (side).
With protective cap, 1-pole socket and
wiring harness with ground contact.
Attachment using two M8 bolts
For work lights with tubular fitting or flexible base.
Contents: Wing nut with screw and washer.
Accessory group
LHT 11
4.123
4