HELLA - Lighting catalogue

Signal Lights
For horizontal or vertical surface mounting
on Fork-lift
LeanLED
In LED-technology. Clear lens. With 24 LEDs.
Rearlight: 1.0W, stoplight: 1.5W, indicator light: 2.0W.
Black plastic body.
Two 3.0 mm dia. holes for fixing screws.
Voltage range: 9V - 31V.
Consumption: 0.38A at 12V, 0.19A at 24V.
See LED instruction 1.
Part no.
Pk.
2SD 343 910-001 1
2SD 343 910-007 48
2SD 343 910-017 48
2SD 343 910-027 48
Rear-stop-indicator light
with 500 mm lead
with 200 mm lead and
4-pole AMP-Superseal plug connector
without lead,
with 4-pole AMP-Superseal plug
8KW 744 808-801 1
Accessories:
4-pole Superseal set,
for -017/-027
For horizontal surface mounting
Red reflector, rear and stop light, amber indicator light
Lens with snap fastening.
Two holes for M5 fixing screws. With plug connector.
Part no.
Pk.
2VA 998 531-031 1 Rear-reflector-stop-indicator light
9EL 997 310-001 1
Spare parts/Accessories:
Lens
P21W bulb,
8GA 002 073-121 10 12V
8GA 002 073-241 10 24V
P21/5W bulb,
8GD 002 078-121 10 12V
8GD 002 078-241 10 24V
For horizontal or vertical surface mounting
Red rear and stop light, amber indicator light.
PC lens with snap fastening.
Two holes for M5 fixing screws. With plug connector.
Part no.
Pk.
2SD 998 531-057 1
2SD 998 531-067 1 right
Rear-stop-indicator light,
left
9EL 998 001-031 2
Spare parts/Accessories:
Lens,
left
9EL 998 001-041 2 right
P21W bulb,
8GA 002 073-121 10 12V
8GA 002 073-241 10 24V
R10W bulb,
8GA 002 071-131 10 12V
8GA 002 071-241 10 24V
5. 44 LHT 11