HELLA - Lighting catalogue

External fitting work lights for upright mounting
Mega-Beam Xenon
Light aperture: 83 x 92 mm. With gas discharge bulb and
DEUTSCH plug connector,
without ballast unit and connecting lead (see accessories)
Reflector made of diecast aluminium, glued to hardened glass lens.
Black body and lens-retaining rim, red cover rim with extending edge
to protect lens.
Pivot base with vibration damping and bracket for four-point mounting
made of stainless steel.
Pivot range vertical 70°.
Work light permanently connected to ballast unit 42W by a 3000 mm long lead.
The lead can be disconnected from the ballast unit by means of a
plug-connection. Type of protection: IP5K4K.
Part no.
Pk.
1GM 996 135-101 1
1GM 996 135-111 1
Work Lights
Xenon work light
with lens pattern for close-range illumination,
recommended angle of inclination: 10° - 20°
Xenon work light
with lens pattern for long-range illumination,
recommended angle of inclination: 5° - 10°
1GM 990 303-151 1
Spare parts/Accessories:
Light unit for -101
8GS 009 028-021 1 D1S gas discharge bulb, 35W
3000 mm connecting lead between work light
8KB 990 299-251 1 and ballast unit
Ballast (for D1S), with DEUTSCH plug connector,
5DV 008 855-001 1 12V
5DV 008 855-007 24
5DV 008 856-001 1 24V
5DV 008 856-007 24
3700 mm long connecting lead with relay and
fuse for DEUTSCH plug connector,
8KB 990 299-221 1 12V
8KB 990 299-231 1 24V
LHT 11
4.103
4