HELLA - Lighting catalogue

Work Lights
External fitting work lights for upright mounting
Ultra-Beam Xenon
Lens pattern for wide, intense and far-reaching illumination.
With DEUTSCH plug connector and gas discharge bulb.
Light aperture: 83 x 83 mm.
Reflector made of diecast aluminium, glued to hardened glass lens.
Black body and red lens-retaining rim made of plastic.
Pivot base with vibration damping and bracket for four-point mounting
made of stainless steel.
Pivot range vertical 105 °.
Work light permanently connected by lead with ballast unit 42W.
The lead can be disconnected from the ballast unit by means
of a plug-connection.
Without connecting lead.Type of protection: IP5K4K.
Part no.
Pk.
1GA 998 534-221 1
Xenon work light
with 3000 mm long connector lead
and 12V ballast unit
1GA 998 534-231 1 and 24V ballast unit
1GA 998 534-271 1
Xenon work light
with 500 mm long connector lead
and 24V ballast unit
1GA 998 525-071 1
Spare parts/Accessories:
Light unit
8GS 009 028-021 1 D1S gas discharge bulb, 35W
Ballast unit,
5DV 008 855-001 1 12V
5DV 008 855-007 24
5DV 008 856-001 1 24V
5DV 008 856-007 24
Connection lead between
work light and ballast unit,
8KB 990 299-241 1 1000 mm
8KB 990 299-251 1 3000 mm
3700 mm long connecting lead with relay and
fuse for DEUTSCH plug connector,
8KB 990 299-221 1 12V
8KB 990 299-231 1 24V
Accessories see page 4.123 - 4.125
4.92 LHT 11